Automated TCL Based ECO Methodology of Post-route Timing Fixes

Authors

  • Laura Virtanen, Jussi Nieminen Technology Research Center, University of Turku, Joukahaisenkatu 3, Turku 20520, Finland

Keywords:

ASIC physical design; ECO automation; Post route timing; Static timing analysis; TCL scripting.

Abstract

The post-route timing closure stage is one of the most time-intensive and error-prone steps in the complex ASIC physical design, this has stayed the same. Following the extensive routing, timing errors are frequently found after the routing and the suspected cause is a correct extraction of parasiticy values therefore providing limited design freedom. ECO traditional practices are based on manual intervention or semi-automation of tool properties, which leads to the high turnaround, fixes incongruity, and the possibility of design rule or signoff breach. The present paper contains an automated Engineering Change Order (ECO) methodology based on TCL directed towards post-route timing fixes. The suggested architecture exploits the capability of structured TCL scripting to read timing, placement, and routing data out of the design database and uses rule-based decision making to discover safe and successful ECO opportunities. Path-aware Automated methods which include insertion of buffers, cell resizing and selective cell swap are used to eliminate setup and hold violations without compromising routing integrity and signoff correctness. The static timing analysis and physical verification loops are closely coupled with the methodology and allow the implementation of ECO through the iterative loop with very little human oversight. After running experimental tests on exemplary ASIC design, substantial decreases in timing produces, enhanced fix consistency, and high productivity advantages can be observed over manual ECO flows. The suggested automation unit on the TCL offers an instrument-free and scalable solution of accelerated post-route timing closure in current ASIC design space.

Downloads

Published

2026-10-01

How to Cite

Laura Virtanen, Jussi Nieminen. (2026). Automated TCL Based ECO Methodology of Post-route Timing Fixes. Journal of VLSI and Embedded System Design, 2(3), 62–71. Retrieved from https://iaeces.com/index.php/JVESD/article/view/271

Issue

Section

Articles